Jeff Rowland Capri
|
The Capri Preamplifier offers a simple feature set for ease of use and a large, high-visibility display for volume level indication. The display can also be configured to turn off after 3 seconds when not in use.
As typical for JRDG products, the entire chassis of the Capri is milled from a solid, massive block of 6061 aluminum to provide a vibration-free and EMI resistant enclosure for sensitive audio circuitry.
Dual line-level outputs (balanced and unbalanced), balanced and unbalanced inputs, and preamp bypass inputs allow unprecedented compatibility with virtually any A/V component in both stereo and multi-channel installations.
The most commonly used features of the preamplifier can be controlled with an easy to use, six function, hand-held IR remote control.
A dual rate volume control allows precision level adjustments over nearly a 100 dB range. The volume control incorporates a permanently noiseless optical encoder that will always maintain its tactile feel, accuracy, and channel balance at all settings.
Optional high quality internal phono preamp modules are available.
Cosmetically and dimensionally, the Capri is the mate for the JRDG Model 102 Stereo Amplifier. The Capri’s sonic performance, interconnect capabilities, and feature set make it a capable preamplifier for any high-end system. |
| Technische Daten: |
| Overall Gain: |
14 dB |
| Gain Range: |
99.5 dB, 199 Equal Increments |
| Gain Resolution: |
0.5 dB, +/-0.03 dB Over Entire Range |
| Frequency Response: |
10 Hz - 350 kHz, -3 dB |
| Maximum Input Level: |
7 volts RMS at 0 dB Gain |
| Maximum Output Level: |
7 volts RMS |
| THD + Noise: |
Less than 0.001% , 7 volt output, 20-20 kHz |
| Signal-to-Noise Ratio: |
Greater than 100 dB |
| Output Noise Level: |
10 Microvolts, Unweighted, 20 Hz to 20 kHz Bandwidth, 0 dB Gain
|
| Common Mode Rejection Ratio: |
> 85dB, 20 Hz 20 kHz |
| Input Impedance: |
48 KOhms Balanced or Unbalanced |
| Channel Separation: |
> 105 dB, 20 Hz to 20 kHz |
| Inputs: |
2 x Pair Balanced XLR, 1 x Pair Unbalanced (RCA) Unity Gain (Bypass), 2 x Pair Unbalanced RCA
|
| Outputs: |
1 x Pair Balanced Line Level, 1 x Pair Unbalanced Line Level
|
| Power Consumption: |
6 Watts |
| Weight: |
9.5 lbs /4.26 kg
|
| Dimensions: |
6.7 cm (H)x 35 cm (W) x 15.7 cm (D)
|
